TheGelBottle Light The Way Nail Lamp

Set Up the Lamp

• Place the lamp on a flat surface and connect it to a power source.
• Adjust any settings or positions for comfort and ease during use.

Select the Timer Setting

• Choose the desired timer setting (often 10, 30, 60, or 99 seconds) based on the product's curing time.
• Press the timer button to activate the lamp, which will automatically turn off when the time is up.

Position the Nails

• Place your hand or foot fully inside the lamp, ensuring all nails are exposed to the LED light.
• Keep fingers or toes still to allow even curing.

Cure According to Product Instructions

• For gel polish, cure each layer as recommended (typically 30 seconds for each coat with LED, depending on the gel formula).
• For builder gels or thicker applications, longer curing times may be necessary (e.g., 60 or 99 seconds).

Complete the Process

• After curing the final layer, remove your hand or foot from the lamp.
• If the product requires, wipe off any sticky residue with a lint-free wipe and cleanser.

Turn Off and Store Safely

• Once done, switch off the lamp and unplug it from the power source.
• Clean the surface of the lamp if needed and store it in a dry place.